Reference Load
Use this figure for model comparison, then confirm the loading basis for the actual material.
HFD model comparison center
Compare Lanphan HFD Models by Reference Load, Trays and Cold Trap
Review the full HFD model comparison, then confirm the loading basis, electrical supply and final configuration for your material and site.
HFD model comparison
Compare reference load, tray count and cold-trap value
Read tray count carefullyHFD-9 has 10 trays while HFD-10 has 4. HFD-20 has 6. Confirm tray dimensions and usable area before comparing loading space.
| Model | Reference Load* | Trays | Listed cold-trap value | Model-sheet voltage |
|---|---|---|---|---|
| HFD-1 | 2-3 kg | 3 | -55℃ | 220V |
| HFD-3 | 2-3 kg | 4 | -55℃ | 220V |
| HFD-4 | 4-6 kg | 4 | -55℃ | 220V |
| HFD-5 | 4-6 kg | 5 | -55℃ | 220V |
| HFD-5S | 4-6 kg | 5 | -40℃ | 220V |
| HFD-6 | 6-8 kg | 4 | -60℃ | 220V |
| HFD-7 | 8-10 kg | 6 | -60℃ | 220V |
| HFD-8 | 10-12 kg | 8 | -60℃ | 220V |
| HFD-9 | 12-14 kg | 10 | -60℃ | 220V |
| HFD-10 | 14-15 kg | 4 | -60℃ | 220V |
| HFD-15 | 15-20 kg | 7 | -60℃ | 220V |
| HFD-20 | 20-25 kg | 6 | -60℃ | 220V |
| HFD-25 | 25-30 kg | 7 | -60℃ | 220V |
| HFD-35 | 50-55 kg | 14 | -65℃ | 220V |
| HFD-40 | 55-60 kg | 14 | -65℃ | 220V |
| HFD-50 | 60-70 kg | 18 | -65℃ | 220V |
| HFD-50plus | 60-70 kg | 18 | -65℃ | 220V |
*Reference figures are provided for model comparison. Confirm the loading basis and final configuration for your material before ordering. Tray dimensions, electrical phase and frequency should also be confirmed.
Need a load between the listed references?HFD-25 is shown at 25–30 kg and HFD-35 at 50–55 kg. Send the material and target batch for configuration review.
How to read the table
Four columns answer four different questions
Use the figures to compare models, then confirm the final selection for your material.
Tray count
Confirm tray dimensions and total usable area before comparing loading space.
Listed cold trap
Confirm the cold-trap value and final refrigeration configuration in the quotation.
Listed voltage
The comparison shows 220V. Confirm phase, frequency and final electrical configuration.
HFD-50 and HFD-50plus
The current comparison data shows the same reference load, tray count and cold-trap value for both entries. Confirm the configuration difference in the final quotation.
Model confirmation
Shortlist by the table, confirm by the real material and site
Send the product, representative tray load, required operating rhythm, destination and electrical supply.